首页 > Products & Solution > PCT HAST Test Chamber
Two Zones Design PCT Aging Test Chamber
  • Two Zones Design PCT Aging Test Chamber
Two Zones Design PCT Aging Test Chamber

Two Zones Design PCT Aging Test Chamber

    Pressure Accelerated Aging Test Chamber (PCT) is widely applied for the testing of sealing property for multi-layer circuit board, IC sealing package, LCD screen, LED, semi-conductor, magnetic materials, NdFeB, rare earths and magnet iron, in which the resistance to pressure and air tightness for above mentioned products can be tested out.

Application:

Pressure Accelerated Aging Test Chamber (PCT) is widely applied for the testing of sealing property for multi-layer circuit board, IC sealing package, LCD screen, LED, semi-conductor, magnetic materials, NdFeB, rare earths and magnet iron, in which the resistance to pressure and air tightness for above mentioned products can be tested out.


Safety device:

1. Safety device for the pot: If the inner box is not closed , the machine can not start

2. Safety Valve: When the inner box's pressure higher than the machine's undertake value, it will self-relieve.

3. Double overheat protection device: When inner box's temperature is too high, it will alarm, and Automatic cut off the heating power.

4. Cover protection: The inner box's cover is made of aluminum alloy, can protect the worker from scald.


Features:

1. Automatic adding water function, and automatic filling water upon the water short storage while testing.

2. Automatic operation to test process finished, easy to use.

3. Temperature control: LED digital temperature controller can make accurate testing of temperature setting, control and display.

4. LED digital timer, when the inner box's temperature reached the setting value, then start to time to ensure the test complete.

5. Accurate pressure: temperature chart always shows the inner box's pressure and relative humidity.

6. Water device is automatically discharge not saturated steam in order to achieve the best steam quality.

7. A integrated silic gel door gasket, air tightness is very good, and long operation life.

8.The inner box is mirror-polished , graceful and non-pollution


Technical Parameters:


ModelPCT - 25PCT - 35PCT - 45PCT - 55PCT - 65
Internal Dimension
       Φ×D (mm)
300×250350×450450×550550×650650×750
External Dimension
       Φ×D (mm)
750×1200×800800×1250×800900×1380×9001050×1550×11001200×1700×1250

Temperature

Range of

Saturated

Steam(Operating

temperature)

(Temperature Rangeof Saturated Steam:100℃~135℃) ,Temperature Range: 120℃,100Kpa/133℃  200 Kpa;(143℃ is special order)

Relative

Pressure/

Absolute

Pressure

Relative pressure: display values  indicated on the  pressure gaugeAbsolute pressure: Value that add 100 Kpa based on display values indicated on the  pressure gauge (The

actual value in the inner box)

Comparison

Table of

Temperature,

Humidity ,

Pressure of

Saturated Steam

Humidity of Saturated Steam100%RH saturation steam humidity

Steam

Pressure

(Absolute

Pressure)

101.3Kpa +0.0Kg/cm2 ~ 2.0Kg/cm2 (3.0Kg/cm2 is special standard)
Recursive DeviceSteam Natural convection circulation
Safety Protective Devise

Water short storage protect, over pressure protect. (have automatically/manual water

replenishing, automatically discharge pressure function )

AccessoriesTwo layers  stainless steel plate
Equipment Capacity(L)174387155250
PowderAC 220V, 1∮ 3  Lines ,50/60HZ ;




Packaging & Shipping

Package: PP film first, and then 10mm foam between machine and the case, and outside is standard export plywood case. 

Packing Detail:


Our Services

Warranty: one year free warranty for whole set machine,lifelong time maintainance.

After-sale service: feedback within 8 hours after get the call or email.

Service:OEM service,Design service,Buyer lable service.


Exhibition:


Company Information

Short introduction about ASLi factory:

We are a long history testing equipment manufacturer, in the past 28 years, we devoted to simulation environmental testing equipment and Mechannical vibration and shock testing machine. Programmable Constant Temperature Humidity Test Machine is our star products , and we had obtained the CE certification for this machine.


FAQ

1. Are your company a trading one or a factory?

Factory ,28 years focusing on test instruments field,4 years exporting experience.

2. After an order is placed, when to deliver?

Generally about 20 days,  If  we have finished products, we can arrange shipment within 3 days.

Please be aware that our production lead times depend on specific items and item quantities.

3. What about the warranty with after - sales services?

12 months warranty.

After the warranty, the professional after-sale service team will provide perfect technical support,and help customer solve problems encountered while using our product, handles guest problems and complaints in a professional and timely.

4. What about the services and product' quality?

Each instruments must be carried out 100% quality examination and test, the finished products must through a third party calibration institutions before shipping and delivery goods.


If you need more information about PCT Test Chamber, please don't hesitate to send your enquiry, we will support more information for your reference.

  • E-mail: Contact@aslitesting.com
  • Tel: +86 769 2316 4266
  • Fax: +86 769 2285 1784
  • Add: JinHui Industrial Park, LiXin Town, East City District-523125, DongGuan, China.

Copyright © AI SI LI (China) Test Equipment Co., Ltd. All Rights Reserved | Sitemap  

Top

Contact Us