Temperature humidity test chambers are available as standard products in a variety of sizes to suit your needs. There are some notice you should pay attention to when you use it.
1. To avoid malfunction of the thermostatic and humid chamber, workers should provide the power supply within the rated voltage range.
2. Do not turn on the power supply before installation and wiring, to prevent electric shock or malfunction and malfunction.
3. This product is non-explosion-proof products, please do not use temperature and humidity machine in combustible or explosive gas surroundings .
4. Please try not to open the test chamber door, open the high temperature may cause burns to the operator, open at low temperatures may cause frostbite on the staff, and may cause the evaporator to freeze, affecting the cooling effect. If it is necessary to open, please do a good job of protection.
5. Do not disassemble, process, modify or repair the thermostatic humidity machine, otherwise there will be abnormal movement, electric shock or fire hazard.
6. The body's ventilation holes need to remain smooth, so as to avoid failure and abnormal action.
7. Do not use the box if you find that the machine is damaged or deformed.
8. Do not allow dust, thread, iron or other things to enter when the machine is installed. Otherwise, an erroneous action or malfunction will occur.
9. Wiring must be correct, be sure to ground connection. Or it may cause electric shock, malfunction, accident, or abnormality.
10. Check the terminal screws and retainers regularly. Do not use them in loose conditions.
11. During operation, the power input terminal cover must be mounted on the terminal board to prevent electric shock.
12. Using modifying, signal output, starting and stopping settings carefully. Wrong operation will cause the working equipment to be damaged.
13. Wipe the instrument using a dry cloth. Alcohol, gasoline or other organic solvents are forbidden. Please stop using immediately once the instrument immersed in water. Otherwise, leakage, electric shock or fire hazard would happen.
14. The internal parts of the instrument have a certain period of life. Please carry out regular maintenance for the continuous and safe use. When scraping this product, please dispose it according to industrial waste.
15. Check the power supply before starting up.
Copyright © AI SI LI (China) Test Equipment Co., Ltd. All Rights Reserved | Sitemap