首页 > News & Events

Notes on High Low Temperature Humidity Chamber

Aug. 29, 2019

1. To ensure the safety of the High Low Temperature Humidity Chamber and the test, please install the external protective grounding and supply the power according to the equipment nameplate;

2. The equipment is strictly forbidden for the test of inflammable, explosive, toxic and corrosive articles;

3. Non-professionals shall not disassemble or repair;

4. The equipment should be reliably grounded;

5. Do not open the door or enter the box unless necessary, otherwise it may cause personal injury and equipment malfunction;

6. The equipment door door lock can only be opened from the outside, and must be monitored by the person inside the box;

7. If a hot sample is placed in the box, use an external power supply for the sample. Do not use the power supply of the device directly.

8. The equipment has a variety of protective measures, please check regularly;

9. When the temperature of the Temperature Humidity Vibration Test Chamber is ≥55°C, please do not open the refrigeration compressor to ensure the normal operation of the compressor.

High Low Temperature Humidity Chamber

High Low Temperature Humidity Chamber

10. When the product with refrigeration function is handled, the inclination angle should not exceed 45 °C. After being placed in place, it should be placed for 1 to 2 days and then turned on again, which is beneficial to the normal operation of the refrigeration system and prolong the service life;

11. Do not open/close the product door by gravity. Otherwise, the door may fall off, resulting in product damage and injury.

12. When the product is stopped for a long time, it should be periodically removed to avoid moisture damage;

13. When transporting High Low Temperature Humidity Environmental Test, care should be taken to avoid damage to vulnerable parts such as instruments on the panel;

14. After reading the attached documents of this equipment in detail, the equipment can be operated;

15. This test chamber is free of explosion-proof devices and must not be placed in a flammable or explosive material.

16. During operation, please do not open the door unless necessary, otherwise it may cause personal injury and equipment malfunction. High and low temperature steam is very dangerous outside the box. The inside of the box door is still hot and burns.


  • E-mail: Contact@aslitesting.com
  • Tel: +86 769 2316 4266
  • Fax: +86 769 2285 1784
  • Add: JinHui Industrial Park, LiXin Town, East City District-523125, DongGuan, China.

Copyright © AI SI LI (China) Test Equipment Co., Ltd. All Rights Reserved | Sitemap  

Top

Contact Us