Mechanical Shock and Impact Tester
Mechanical Shock and Impact Tester is mainly used for small products for impact test, to assess the product's ability to withstand shock damage. It is often used in electronic components, electronic circuit boards and other environmental testing.
Shock Test bench
Shock and measure controller
Mechanical Shock and Impact Tester Technical Parameters:
|Load capacity (kg)||50||100||200||500||800|
|pulse acceleration (m/s2)||50~1200||50~1000||50~1000||50~500||50~500|
|Pulse Width (ms)||20~3||20~3||20~3||20~3||20~3|
|Frequency (times /min)||10~80||10~80||10~80||10~80||10~80|
|Table Size (mm)||500X700||700X700||700X700||800X800||1000X 1000|
|Max. Dropped Height (mm)||60||60||60||60||60|
|Pulse Type||Half Sine wave, (trapezoidal wave, and the sawtooth wave, square wave optional)|
|External Dimension WXHXD (mm)||800X1300X|
|Protection Device||Door protection, over-load protection, zero signal protection|
|Power||AC 220V(±10%), 1∮3 Lines ,50/60HZ; AC 380 V(±10%) ,3∮ 5 Lines,50/60HZ|
|Environmental Conditions||Temperature: 25℃±5.0℃ humidity: <85%(25℃)|
Mechanical Shock and Impact Tester Features:
1. Working bench with perfect structure, good uniformity of bench's acceleration.
2. High reliable of system, safety device.
3. The saw-tooth wave and trapezoidal wave, etc. extensible.
4. Capacity of crash and impact test function.
5. Optoelectronic feedback.
electrical circuit testing equipment,impact test equipment,material testing equipments manufacturers,mechanical shock test equipment,Mechanical Shock Tester,test equipment auctions,test equipment distributors,test equipment manufacturers
Copyright © AI SI LI (China) Test Equipment Co., Ltd. All Rights Reserved | Sitemap