Damp-Heat Test(Double 85 Test)
To determine the ability of the module to withstand the effects of long-term penetration of humidity.
Reference Standard: IEC 61215:2005 & Ed.3, IEC 61646:2008 ―damp-heat test, Test temperature 85°C±2°C, Relative humidity 85%±5%, Test duration 1000h
1. Graceful appearance, circularly shaped body, surface treated with mist strips and plane handle with no reaction. Easy to operate, safe and reliable.
2. Rectangular double-glassed watching window for the observation of the test production during the testing process. The window is equipped with sweat-proof electrical heating device that can prevent water steam from condensing into droplets, and with high brightness PL fluorescent bulbs to provide light inside the box.
3. Double-layer-insulated airtight doors, able to insulate the internal temperature effectively.
4. Water supply system that is externally connectable, convenient for refilling water into the humidifying pot and automatically recyclable.
5. The French Tecumseh brand is used for the circulation system of the compressor, capable of removing the lubricant between the condensation pipes and capillaries. The environment-protecting coolant is used for the whole series (R232,R404)
6. Imported LCD display screen, capable of displaying the measured value as well as the set value and time.
7. The control unit has the functions of multiples segment program editing, and of quick or slope control of temperature and humidity.
8. Inserted mobile pulley, convenient for movement an relocation, with strong positioning screws.
| Low Temperature(A:25℃ B:0℃ C:-20℃ D:-40℃ E:-60℃ F:-70℃)|
High Temperature 150℃
|20%~98%R.H.(10%-98% R.H. / 5%-98% R.H ,is a special optional condition, need Dehumidifier)|
of temperature and humidity
|0.1℃; 0.1% R.H/±2.0℃; ±3.0% R.H.|
Accuracy ofTemperature and Humidity
|±0.5℃; ±2.5% R.H.|
Temperature rising approx. 0.1~3.0℃/min / temperature falling approx. 0.1~1.5℃/min;
( The Falling Speed Rate Min.1.5℃per minute is a special optional condition)
|Material||Material of the inner box is SUS 304# stainless steel, of the outer box is stainless steel or SEE cold-rolled steel with paint coated, Insulation material is resistant to high temperature, high density, formate chlorine, ethyl acetum foam insulation materials|
|Wind cooling or water cooling/single segment compressor(-40℃, double segment compressor -70℃)|
Fuse-free switch, overloading protection switch for compressor, high and low voltage coolant protection switch, over-humidity and over-temperature protection switch, fuses, fault warning system, water short
storage warning protection
|Inner door with operation hole , Recorder, Water Purifier, Dehumidifier|
|Compressor||French Tecumseh Brand,Germany Bizer Brand|
|Power||AC220V 1ph 3 lines, 50/60HZ , AC380V 3ph 5 lines , 50/60HZ|
Warranty: one year free warranty for whole set machine,lifelong time maintainance.
After-sale service: feedback within 8 hours after get the call or email.
Service:OEM service,Design service,Buyer lable service.
Package: Standard export wooden case, plywood case or according to customer's requirement.
ASLi main products: Environmental chambers, temperature (humidity) chamber, PCT /Hast chamber (Highly accelerated stress test chamber),ESS chamber, Walk in stability chamber,Vacuum oven,Altitude chamber,vibration test system, mechanical shock tester,environmental combined vibration chamber,etc
Welcome our new and regular customers visit our factory, and any inquiries please feel free to contact us for quotation !
Copyright © AI SI LI (China) Test Equipment Co., Ltd. All Rights Reserved | Sitemap