Home >> Products & Solution >> Direct Industry
TH-1000-D Programmable stability test chamber
  • TH-1000-D Programmable stability test chamber
TH-1000-D Programmable stability test chamber

TH-1000-D Programmable stability test chamber

TH-1000-D stability test chamber


stability test chamber is used to test various types of materials for their tolerances of heat, cold, dry, humidity. It is applied for quality inspection for all types of electronic products, electric 

appliance, and products from communication, instrument, automobile, plastic, metal, food, chemical, building materials, medical and aerospace industries.

"stability chamber qualification"


1. Graceful appearance, circularly shaped body, surface treated with mist strips and plane handle with no reaction. Easy to operate, safe and reliable.

2. Rectangular double-glassed watching window for the observation of the test production during the testing process. The window is equipped with sweat-proof electrical heating device that can prevent water steam from condensing into droplets, and with high brightness PL fluorescent bulbs to provide light inside the box.

3. Double-layer-insulated airtight doors, able to insulate the internal temperature effectively.

4. Water supply system that is externally connectable, convenient for refilling water into the humidifying pot and automatically recyclable.

5. The French Tecumseh brand is used for the circulation system of the compressor, capable of removing the lubricant between the condensation pipes and capillaries. The environment-protecting

 coolant is used for the whole series (R232,R404)

6. Imported LCD display screen, capable of displaying the measured value as well as the set value and time.

7. The control unit has the functions of multiples segment program editing, and of quick or slope control of temperature and humidity.

8. Inserted mobile pulley, convenient for movement an relocation, with strong positioning screws.

Technical Parameters:   

Model TH-1000-D
Internal Dimension W1000xH1000xD1000(mm)
Internal Dimension W1600xH2100xD1450(mm)



 Low Temperature: D:-40℃
 High Temperature 150℃
Humidity Range

 20%~98%R.H.(10%-98% R.H. / 5%-98% R.H ,is a special optional

 condition, need Dehumidifier)

Analytic Accuracy/


uniformity of

temperature and 


 0.1℃; 0.1% R.H/±2.0℃; ±3.0% R.H.
Control Accuracy of

Temperature and 


 ±0.5℃; ±2.5% R.H.



Speed Rate

 Temperature rising approx.  0.1~3.0℃/min / temperature falling 

 approx.  0.1~1.5℃/min;

 ( The Falling Speed Rate Min.1.5℃per minute is a special optional




control chart

 Material of the inner box is SUS 304# stainless steel, of the outer

box is stainless steel or SEE cold-rolled steel with paint coated,

Insulation material is resistant to high temperature, high density, 

formate chlorine, ethyl acetum foam insulation materials 

 Cooling System

 Wind cooling or water cooling/single segment compressor

(-40℃, double segment compressor -70℃)

 Protection Devices

 Fuse-free switch, overloading protection switch  for compressor,

 high and low voltage coolant protection switch, over-humidity and over-temperature protection switch, fuses, fault warning system, water 

short storage warning protection



 Inner door with operation hole , Recorder, Water Purifier, Dehumidifier
 Compressor French Tecumseh Brand,Germany Bizer Brand
 Power AC220V  1ph 3 lines, 50/60HZ ,  AC380V   3ph  5 lines , 50/60HZ
 Approx. Weight (Kg) 800

"humidity tester""stability chamber manufacturer"

  • E-mail: Contact@aslitesting.com
  • Tel: +86 769 2316 4266
  • Fax: +86 769 2285 1784
  • Add: JinHui Industrial Park, LiXin Town, East City District-523125, DongGuan, China.

Copyright © AI SI LI (China) Test Equipment Co., Ltd. All Rights Reserved | Sitemap  


Contact Us